An electrically operated water pump is the prime motivator in recirculating the water from the pool. Water is forced through a filter and then returned to the pool. Using a water pump by itself is often not sufficient to completely sanitize a pool. Commercial and public pool pumps usually run 24 hours a day for the entire operating season of the pool. Residential pool pumps are typical run for 4 hours per day in winter (when the pool is not in use) and up to 24 hours in summer. To save electricity costs, most pools run water pumps for between 6 hours and 12 hours in summer with the pump being controlled by an electronic timer. Most pool pumps available today incorporate a small filter basket as the last effort to avoid leaf or hair contamination reaching the close-tolerance impeller section of the pump. There are several variations of the swimming pool pump: Above ground pools – require much less energy and force to control water within their area. In Ground Pools – require more energy as the amount of water can be in the thousands of gallons depending on the size of the swimming pool
The body of the pump is made of the latest generation thermoplastics. The pumps are self-priming and range from 3/4 Hp up to 2 Hp, and are provided with both single-phase and three-phase motors. A pre-filter has been integrated into the body of the pump to prevent the entry of any foreign bodies which could cause damage to the hydraulic parts of the pump.
The motors supplied with the motor pump unit have been protected with IP-55 protection and are adapted to withstand hot atmospheres and high humidity levels
The body of the pump is made of the latest generation thermoplastics. The pumps are self-priming and range from 1/2 Hp up to 1.5 Hp, and are provided with both single-phase and three-phase motors. A pre-filter has been integrated into the body of the pump to prevent the entry of any foreign bodies which could cause damage to the hydraulic parts of the pump.
The motors supplied with the motor pump unit have been protected with IP-55 protection and are adapted to withstand hot atmospheres and high humidity levels
The body of the pump is made of the latest generation thermoplastics. The pumps are self-priming and range from 3/4 Hp up to 3 Hp, and are provided with both single-phase and three-phase motors. A pre-filter has been integrated into the body of the pump to prevent the entry of any foreign bodies which could cause damage to the hydraulic parts of the pump.
The motors supplied with the motor pump unit have been protected with IP-55 protection and are adapted to withstand hot atmospheres and high humidity levels
The ALASKA PLUS pump range PUMP introduces a new hydraulic design that gives you an excellent noise performance while it is working at standard conditions. The pumps are self-priming and range from 0.5 Hp up to 3 Hp, and are provided with both single-phase and three-phase motors. A pre-filter has been integrated into the body of the pump to prevent the entry of any foreign bodies which could cause damage to the hydraulic parts of the pump. The motors are supplied with the motor pump unit and have been protected with IP-55 protection to hold hot atmospheres and high humidity levels. These pumps are “GS” certified by TÜV.
ALASKA PUMP SPECIFICATIONS – PRODUCT AND ACCESSORIES DESCRIPTION hp, and are provided with single-phase motors. A pre-filter has been integrated into the body of the pump to prevent the entry of any foreign bodies which could cause damage to the hydraulic parts of the pump. The motors supplied with the motor pump unit have been protected with IP-55 protection and are adapted to withstand hot atmospheres and high humidity levels.
Monobloc horizontal centrifugal pumps with a horizontal volute and a attached pre-filter with an stainless steel AISI-304 basket. Appropiate for public swimming pools and clean liquid recirculation. 1450 r.p.m. high performance pumps with the body, impeller, pre-filter and bracket manufactured in cast iron. The shaft is made of stainless steel AISI-316 with bronze protection, and the mechanic seal is made of stainless steel AISI-316. The motor holds an IP-54 protection. The gamma ranges from triphasic 3 HP to 25 HP motors. Such motors have a 230/400/690V 50Hz working voltage (60 hz could also be supplied). Hub by flange according to DIN-2501 regulation.
According the Energy Efficiency regulation class IE2
– 1450 r.p.m. centrifugal pump.
– Pump housing, impeller and diffuser made in cast iron.
– AISI-316 stainless steel shaft.
– Mechanical seal in AISI-316 stainless steel.
– IP-54 protection grade.
– Isolation level Class F (enables it to tolerate internal temperatures of up to 155ºC).
– Cast iron prefilter included with 11 liters capacity and 37 liters capacity for 20HP & 25HP models.
– AISI-304 stainless steel prefilter strainer for 11 liters prefilter and AISI-316 for 37 liters prefilter
Monobloc horizontal centrifugal pumps with a horizontal volute and a attached pre-filter with an stainless steel AISI-304 basket. Appropiate for public swimming pools and clean liquid recirculation. 3000 r.p.m. high performance pumps with the body, impeller, pre-filter and bracket manufactured in cast iron. The shaft is made of stainless steel AISI-316 with bronze protection, and the mechanic seal is made of stainless steel AISI-316. The motor holds an IP-54 protection. The gamma ranges from triphasic 3 HP to 25 HP motors. Such motors have a 230/400/690V 50Hz working voltage (60 hz could also be supplied). Hub by flange according to DIN-2501 regulation. According the Energy Efficiency regulation class IE2.
– 3000 r.p.m. centrifugal pump.
– Pump housing, impeller and diffuser made in cast iron.
– AISI-316 stainless steel shaft.
– Mechanical seal in AISI-316 stainless steel.
– IP-54 protection grade.
– Isolation level Class F (enables it to tolerate internal temperatures of up to 155ºC).
– 11 litres capacity cast iron prefilter included.
– AISI-304 stainless steel prefilter strainer.
High performance self-priming monobloc pumps for public swimming pools and clean liquids recirculation. The hydraulic body, impeller and diffuser manufactured in cast iron. The shaft and the mechanic seal are made of stainless steel AISI-316. Includes a prefilter with a polypropilene basket. The motor holds an IP-54 protection. The gamma ranges from triphasic 2 HP to 5.5 HP motors. Such motors have a 230/400/690V 50Hz working voltage (60 hz could also be supplied). For the 2 CV motor, 24/42V is also avaiable.According the Energy Efficiency regulation class IE2.
– 3000 r.p.m. self-priming pump with a maximum suction height of 4m.
– Pump housing, impeller and diffuser made in cast iron.
– AISI-316 stainless steel shaft.
– Mechanical seal in AISI-316 stainless steel.
– IP-54 protection grade.
– Isolation level Class F (enables it to tolerate internal temperatures of up to 155ºC).
– In-built cast iron prefilter.
– Polypropylene prefilter strainer.
Monobloc horizontal centrifugal pumps attached to a pre-filter with an stainless steel AISI-304 basket. Appropriate for sea water. 3000 r.p.m. high performance pumps with the body, impeller, pre-filter and bracket manufactured in bronze. The shaft is made of stainless steel AISI-316 with bronze protection, and the mechanic seal is made of stainless steel AISI-316. The motor holds an IP-54 protection. The gamma ranges from triphasic 3 HP to 15 HP motors. 230/400/690V 50Hz working voltage (60 hz could also be supplied). Hub by flange according to DIN-2501 regulation. According the Energy Efficiency regulation class IE2.
– 3000 r.p.m. centrifugal pump with a maximum suction height of 4m.
– Specially designed to use with sea water.
– Pump housing, impeller and diffuser made in bronze.
– AISI-316 stainless steel shaft.
– Mechanical seal in AISI-316 stainless steel with contact sides in tungsten carbide.
– IP-54 protection grade.
– Isolation level Class F (enables it to tolerate internal temperatures of up to 155ºC).
– 11 litres capacity bronze prefilter included.
– AISI-304 stainless steel prefilter strainer.
Monobloc self-priming high performance pumps, designed for sea water. The hydraulic body, impeller and diffuser manufactured in bronze. The shaft is made of stainless steel AISI-316, and the mechanic seal is made of stainless steel AISI-316 and tungsten. Includes a prefilter with a polypropilene basket. The motor holds an IP-54 protection. The gamma ranges from triphasic 2 HP to 5.5 HP motors. Such motors have a 230/400/690V 50Hz working voltage (60 hz could also be supplied). For the 2 CV motor, 24/42V is also available. According the Energy Efficiency regulation class IE2.
– 3000 r.p.m. self-priming pump with a maximum suction height of 4m.
– Specially designed to use with sea water.
– Pump housing, impeller and diffuser made in bronze.
– AISI-316 stainless steel shaft.
– Mechanical seal in AISI-316 stainless steel with contact sides in tungsten carbide.
– IP-54 protection grade.
– Isolation level Class F (enables it to tolerate internal temperatures of up to 155ºC).
– In-built bronze prefilter.
– Polypropylene prefilter strainer.
Applications:
A large volume centrifugal pump, to which a pre-filter has been applied in the inlet, making these the ideal pumps for large filtering units. The fact that the pump works with a 4 poles motor makes it very quiet and long lasting. Constructive Characteristics:
Pump body, support, pre-filter and impeller in cast iron. Shaft-coupling and pre-filter sieve in AISI 316 stainless steel. Mechanical seal in carbon – silicon carbide. On demand the CF-4 pump range may be supplied with bronze impeller (standard in cast iron) or with other versions of mechanical seal, such as: tungsten carbon, AISI 316, epdm, viton etc… Maintenance:
These pumps are easy and simple to maintain, as the construction of the pump, which includes a totally standard motor allows the motor to be changed or repaired without emptying the installation, even when you do not have pump inlet and outlet valves, or removing any part from the hydraulic part of the pump. Motor:
Standard asynchronous motor, sealed from external ventilation. Its standard construction allows it to be replaced with another standard motor at any time and in any place.
Protection IP-55. 2 poles 50Hz.
230/400V.
Bronze impeller on demand (add -BR after pump code).
Applications:
A large volume centrifugal pump, to which a pre-filter has been applied in the inlet, making these the ideal pumps for large filtering units. The bronze version is ideal for sea water and automatic pool systems that use salt electrolysis as a means of disinfecting.
Constructive Characteristics:
• Cast iron version: Pump body, pre-filter, coupling and impeller in cast iron. Shaft and pre-filter sieve in AISI 316 stainless steel. Mechanical seal in carbon-ceramic.
On request, the impeller may be in bronze and the mechanical seal in silicon carbide or tungsten carbon.
• Cast bronze version: Pump body, pre-filter, support and impeller DIN-1705 RG 5 bronze (G-CuSn 5 ZnPb). Shaft, pre-filter sieve and bolts in AISI 316 stainless steel. Cast iron coupling. Mechanical seal in carbon-ceramic and AISI 316 stainless steel.
On request, these pumps may be supplied in any other bronze alloy. Maintenance:
These pumps are easy and simple to maintain, as the construction of the pump, which includes a totally standard motor, allows the motor to be changed or repaired without emptying the installation, even when you do not have pump inlet and outlet valves, or removing any part from the hydraulic section. Motor:
Standard asynchronous motor, sealed from external ventilation. Its standard construction allows it to be replaced with another standard motor at any time and in any place.
Protection IP-55. 2 poles 50Hz .
230/400V.
Bronze impeller on demand (add -BR after pump code).
Centrifugal High Flow Plastic pumps at 3000 rpm. · Electropumps for swimming pools, with or without prefilter, ideal for high flow at low pressure. · Prefilter with transparent lid. Fixing by butterfly nut. Easy accessibility. · Pump body and prefilter made in polypropylene reinforced with fibre glass. · Bronze impeller. · Pump shaft and prefilter basket in stainless steel. · Motors with IP-55 protection, 3000 r.p.m., 230/400 V or 400/690 V, and 50Hz. · From 7.5 HP to 12.5 HP.
High performance pump for residential pools offering silent operation and reliability at low temperatures. . Available from 0.75 HP to 3 HP, with single-phase and three-phase motors. . Simple assembly with high quality mechanical seal and bearings. . Easy-open strainer lid. . Connections with standardised fi ttings. . Possibility of removing the motor without touching the pump’s hydraulic system. . New: All the models carry ATB motor. · Flow rates in l/h at 10 m head for all the models. . According the Energy Efficiency regulation class IE2
Available from 1 HP to 3 HP, with single-phase and triphasic motors. Simple assembly with components such as mechanic seal and high quality bearings. Easy-open prefilter cover. Connections with standardised nipples. Possibility of separation of the motor without touching the pump’s hydraulics system.
Fiji is a high performance pump designed for above ground pools, working under a vast range of conditions whilst delivering the requested fl ow and pressure.
• The Fiji pump features a see-through lid for easy inspection, easy-to-remove drain plugs and a large strainer to extend the time between cleaning.
• The motor materials are rustproof with a stainless steel motor shaft and sealed bearings that never need lubrication.
• The thermoplastic housing is built to withstand extreme heat and resist corrosion.
• Single phase motors are available from 0,18 Hp up to 0,3 Hp.
• A pre-fi lter has been added to prevent the entry of any foreign bodies which could cause damage to the hydraulic parts of the pump.
• Fiji is quiet due to its innovative hydraulic design.
• Every Fiji pump is performance and pressure tested prior to shipment to ensure superior quality.
• TUV GS certified.
Gemas streamer 2010 self-priming, thermoplastic body monoblock pool pump; complete with pre-filter. Up to 1 1/2 hp, suction 1 1/2 – . Discharge 1 1/2″; bigger sizes both 2. Connections are with unions. Easy opening lid with 40° rotation. Xylex lid option against aggressive chemicals for polycarbonate. Large basket. 2850 rpm – ip 55 motor. Pump shaft in aisi 316 quality stainless steel.
